China Factory Single Cylinder Hydraulic Cone Crusher
|FOB Price:||US $5,000 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $5,000/ Piece|
|Payment Terms:||L/C, T/T, D/P, Western Union, Paypal, Money Gram|
- Model NO.: HYP
- Application: Machinery & Hardware, Art & Craft, Chemical, Construction, Mineral Industry, Stone Industry
- Crushing Style: Impact
- Crushing Degree: Intermediate Crusher
- Certification: CE, ISO, GOST, SONCAP, UL, CCC, API
- Color: Red
- Capacity: 20-600 T/H
- Transport Package: Plastic Film
- Origin: Tangshan
- Type: Cone Crusher
- Drive: Hydraulic
- Compressive Strength (For Crushing): >300MPA
- Finished Surface: Cut Off Tool
- Condition: New
- The Maximum Feed Size: 18-450mm
- Trademark: TSDC
- Specification: HYP300
- HS Code: 84742090
1. Reasonable structure advanced crushing principle and technical specification, reliable work and
2. Strong crushing ability; High efficient productivity; High capacity.
3. Reliable Hydraulic system providing safe and effective overload protection.
4. Two type of crushing chamber are for wide range of product size requirement.
5. High automation adopting hydraulic adjustment and hydraulic clean cavity setting.
Working principle of Spring Cone Crusher
Reasonable structure advanced crushing principle and technical specification, reliable work.When the Cone crusher is working, the motor drives the eccentric bearing bushing via spring coupling, transmission shaft and a couple of cone gear wheels. The crushing cone axis is forced to swing by the eccentric bearing bushing, which makes the mantle sometimes close to the bowl liner, and sometimes far away from the bowl liner. The raw materials are pressed, impacted and finally crushed in the crushing chamber.HYP series single-cylinder cone crusher has the followingfeatures, its applicability is wide.This machine can be used in all kinds of ores and finelyprocessing, can also be used for different particle size constructionapplication of production.Used a variety of chamber type design, when users have the needs of different granularity, only need to replace the correspondingtype crushing cavity plate can get equired size.
Cone crusher crushes materials by the working surface between the movable cone and fixed cone. The movable cone of the cone crusher is supported by spherical bearing and fixed on an hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are drived by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear, and the wheel of the conveyor belt is drived by motor through v-belts. The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve of cone crusher rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the cone leaves, grinded materials is discharged from the diacharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole, consequantly the output size is determined.
|model||Motor Power(KW)||maximum feed size(mm)||Cavity||Discharge port Corresponding to the capacity|
HYP series single-cylinder hydraulic cone crusher has a combination of crushing machinery, hydraulic, electrical, automation and intelligent control technology. The machine is the high efficient crusher which is researched and developed independently by our company based on 20 years of experience on design, production, sales and service, combined the development of modern industrial technology, and has widely absorbed advanced crusher technology of the United States and Germany. This machine represents the world's most advanced technology and has many incomparable advantages such as high efficiency, low production cost, easy maintenance and good product shape. It can be widely used in intermediate crushing, fine crushing and ultra fine crushing operations.
The working principle of HYP single-cylinder hydraulic cone crusher
HYP series single-cylinder hydraulic cone crusher is mainly composed of upper bracket, middle bracket, bottom bracket, movable cone, eccentric sleeve, transmission and hydraulic cylinder. The whole working process of this machine is that motor drives rotation of horizontal axis, horizontal axis drives the rotation of eccentric sleeve through the spiral bevel gear, and then eccentric sleeve would drive the rotary oscillation of movable cone so as to realize the continuous extrusion.
The adjustment of hydraulic cylinder at the bottom of movable cone can drive main shaft thus driving movable cone move up and down to easily adjust the space of movable cone and the lining plate of fixed cone, then the product size will be controlled. Hydraulic cylinder also has the function of overload protection. When materials that cannot be crushed (such as iron) enter into crushing chamber, the accumulator will be triggered, then the hydraulic cylinder will drop movable cone to release the iron and recover normal crushing automatically, which can protect the crusher perfectly.