Reliable wet magnetic separator for iron sand for sale with CE wet magnetic separator for iron sand for particle size less than 3mm magnetite, pyrrhotite, limonite and other materials, wet magnetic separation, but also for coal, non-metallic minerals, building materials and other materials in addition to iron work. Available downstream, semi-reflux, reflux-type and other forms of wet magnetic separator for iron sand, cylinder surface magnetic field strength can be produced according to the actual use of the special.
wet magnetic separator for iron sand Advantages: 1. Can improve mineral grade, reduce process under a load.
2. Sorting of fine ore, return to re-burn.
3. Remove impurities, improving the quality.
4. Applicable to a wide range. wet magnetic separator for iron sand working principle
The working principle of wet magnetic separator for iron sand is as the following: When the ore pulp folw into the magnetic field, the strong magnetic minerals are adsorbed on the surface of the drum. The weak magnetic and non-magnetic minerals are cast off and discharged, while the strong magnetic minerals on the surface of the drum rotate with the drum and will be brought out of magnetic field to complete the sorting operation.
Overview: Magnetic separator can be divided into dry magnetic separator and wet magnetic separator. The magnetic separator is the most widely used mining machine with advantages of simple structure, easy to operate, easy to maintain and so on. The magnetic separator is widely used in iron powder removal, and magnetic separator is also widely used in resource recovery, timber industry, mining, ceramic, chemical, food and so on. The magnetic separator is suitable for wet magnetic separation of magnetite, pyrrhotite, roasted ore, ilmenite and other materials with granularity below 3mm, and the iron removal of coal, non-metallic mineral, building material and other material.
Structure: The magnetic separator is mainly composed of drum, roller, brush roller, magnetic system, tub and transmission parts. Cylinder is rolled welding by 2-3 mm stainless steel plate, and the end cover is aluminum casting connected by stainless steel screw and barrel. Motor regulates motor speed through the reducer, which drives the cylinder and magnetic roll do rotary motion. Magnetic system is open, installed in inside cylinder and all bared magnetic. Magnetic block is installed in the plate of yoke by stainless steel bolt, and the shaft of the yoke is out of the barrel. The end shaft is fixed with turn arm, which can adjust the magnetic system angle. The working area of trough is made up with stainless steel, and the frame and other parts of the cell body is welded with ordinary steel.
|Magnetic intensity(Gauss)||Rotating speed(r/min)||Capacity (T/H)||Motor Power(kw)|
|Dry separator|| || || || || || |