High Quality Stone Crusher Double Toggle Jaw Crusher
|FOB Price:||US $5,000 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $5,000/ Piece|
|Transport Package:||Plastic Film|
|Payment Terms:||L/C, T/T, D/P, Western Union, Paypal, Money Gram|
- Model NO.: PE
- Motor Type: AC Motor
- Application: Water Conservancy
- Outlet Size: 40-100mm
- Condition: New
- The Maximum Feed Size: 18-450mm
- Trademark: TSDC
- Origin: Tangshan
- Type: Reaction Crusher
- Motor Power: 280kw
- Materials: Limestone
- Inlet Size: 500×750mm
- Model: PE600*900
- Capacity: 150-600 T/H
- Specification: PE600*900
- HS Code: 8474209000
In the crushing line, the stone jaw crusher is usually used in the primary crushing. The stone crushed by the jaw crusher will be delivered to the impact crusher by belt conveyor. After crushed by the impact crusher, the crushed stone will be delivered to the vibrating screen. The finished product will be screened out. The stone bigger than the required size will be returned to the impact crusher for recrushing. It's a closed circuit.
jaw crusher is mainly composed with machine body, eccentric axis, connection rod, jaw plate and regulating mechanism. V belt is used to transfer the momentum to the connection rod to drive the moveable jaw plate to crush materials. The size of discharge material can be adjusted by regulating adjustment nut and screw, top plate base and sliding seat.
jaw crusher body is made of cast iron; the front wall is installed with fixed jaw plate; the rear wall is installed with spring and lockup nut; the two sides are installed with lining plate and rectangular iron bar; the top is installed with two sliding bearing blocks used to support the eccentric axis. The eccentric axis is supported in the sliding bearing trial hole and the middle is connected by two roll bearing connection rods. Moveable jaw plate is installed on top of connection rod and the under part is connected with the regulating mechanism through bracket plate.
jaw crusher motor drives the movable jaw up and down through eccentric shaft. The angle between toggle plate and movable jaw increases when movable jaw moves up. So the movable jaw will be closed to the fixed jaw. The stuff will be crushed in this process. The angle between toggle plate and movable jaw decreases when movable jaw moves down, movable jaw moves away from fixed jaw under the movement of draw rod and spring, the material will be discharged from the discharging opening. This process is repeated. The movable jaw will crush and discharge the stuff periodically to achieve mass production.
Jaw crusher working part of the machine is two jaw plate, fixed jaw plate (Ding E), vertical (or the upper end of the slightly decumbent) fixed on the front wall of the body, the other is movable jaw (jaw) and inclined position, and the fixed jaw plate formed on a small crushing cavity (cavity). The movable jaw plate is a periodic movement of the fixed jaw plate, sometimes separated from the fixed jaw plate. When the material is separated into the crushing chamber, the finished product is discharged from the lower part; the material is close to the material, which causes the material to be loaded in the two jaw plate to be squeezed, bent and split.
|Discharge range (mm)||Motor Power|
stone crusher Features:
1. Assembled PE Jaw Crusher: easy installation, good balance, with cushion and stopper.
2. Integrated motor: crusher motor frame, the motor frame and crusher-one structure,reducing installation space and belt length, increasing the life of belt because of the simultaneous movement of crusher and motor.
3. The finite element analysis techniques: with the aid of the industry's most professional mechanical design software, the whole design process and the processing technology has been efficiently controlled to gain higher yields and efficiency,meanwhile, material has been fully used to make less weight of crushers.
4. Bearing: containing 4 same bigger bearings, jaw crusher has longer service life.
5. Bigger output: new kinematics design and suitable rotation rate make the movable jaw can get more impact. With the symmetrical shaped structure crushing chamber,the crusher can get higher output.
6. Insert adjustment: at mechanization adjustment, the crusher can be regulated whether at work or shutdown. When turned into hydraulic adjustment, automatic control is achieved.